Submersible pump
The TVEM submersible pump is a multi-stage centrifugal pump, which is an efficient and energy-saving submersible product.
Classification:
Key words:
Product Description
The TVEM submersible pump is a multi-stage centrifugal pump, which is an efficient and energy-saving submersible product.
Series Pumps(338/387/400/540/538/562/675/862/950)
● Computer 3D design
● Wide range of rate
● A variety of pump structure design can be combined with each other to improve the ESP’s performance in various well conditions.
Standard pump Float pump, strong self-regulation ability, optimizeperformance;
Anti-abrasive pump Float of full compression design with anti-abrasive bearing, improve anti-abrasive performance;
Wide ROR pump Full compression design, special anti-abrasive bearing, mixed flow impeller and diffuser, Widen ROR,improve anti-abrasive performance and adaption forcomplicated well condition.
● Anti-corrosive pump Different anti-corrosive material and coating improve the performance in complicated corrosive wells.
● Ni-resist stage, investment casting
● Inconel 718/ Monel K-500 high strength shaft
● CEF thrust washer
● Tungsten carbide radial bearing
Series Gas Handlers(387/400/540)
● Tungsten carbide radial bearing
● Ni-resist stage, investment casting
● Monel K-500/Inconel 718 high strength shaft
Horizontal Injection Pump(513/538/562/675/862/950)
Water injection pumps are widely used in production water injection wells in oil fields. It is one of the indispensable auxiliary equipment for oil recovery in the middle and late stages of oil production to ensure high and stable crude oil production. TVEM has independently developed a series of high-pressure water injection pump products based on the requirements of domestic and foreign market users. The products have stable flow rate,low noise, long service life, convenient maintenance, and reliable operation.
● Sealed thrust section has high axial bearing capacity
● Small occupation, smooth operation.
● Automatic pressure and temperature control, Reliable protection system
● The pressure at the intake of the atmospheric water injection pump system is less than or equal to 2MPa; The pressure at the intake of the pressurized water injection pump system is less than or equal to 15MPa
Pump-Rate Range
| Series |
OD in[mm] |
Min. Casing OD in[mm] |
Min. Rate 60HZ[BPD] |
Max. Rate 60HZ[BPD] |
Min. Rate 50HZ[M3 /D] |
Max. Rate 50HZ[M3 /D] |
|
338 |
3.38 [85.9] |
4.5 [114.3] |
250 |
2500 |
30 |
300 |
|
387 |
3.87 [98.3] |
5.5 [139.7] |
150 |
6800 |
20 |
900 |
|
400 |
4.00 [101.6] |
5.5 [139.7] |
150 |
6800 |
20 |
900 |
|
540 |
5.13 [130.3] |
6.625 [168.3] |
1100 |
14000 |
150 |
1800 |
|
538 |
5.38 [136.6] |
7 [177.8] |
1100 |
15000 |
150 |
2000 |
|
562 |
5.62 [142.7] |
7 [177.8] |
7500 |
31700 |
1000 |
4100 |
|
675 |
6.75 [172] |
8.625 [219] |
6200 |
41000 |
820 |
5400 |
|
862 |
8.62 [218.9] |
10.75 [273] |
11500 |
30000 |
1520 |
3975 |
Remark: We also provide the following products:
● Vertical water injection pump for all series
● Anti-corrosive pump for all series
Previous Page:
Next page:
Related Products
Product inquiry